FAQ: How do I manually copy a file to the file server?

If there is a internet connection issue at the end of the run, the file did not automatically upload to the server.

1. ACCESS robot main interface

Go to the ACCESS robot where the experiment was performed and make sure the file server is connected.
Click on Copy_Files

2. Copy_Data_to_Server interface

1. Select the instrument number
2,3. Select the correct month if necessary
4. Highlight the file to upload
5. Click on the Upload_Selections
6. This interface can also be used to download files from the server

3. Verify the upload

1. The upload should show immediately
2. Click to exit window

Previous Lesson: FAQ: How do I change the username or project name of a growth file? Table of Contents